Oct 31

Stampin Up Owl Punch

The Stampin Up Owl Punch is an incredibly versatile addition to your craft collection.   Seriously, you could choose any holiday through the year and we could come up with some way to use the owl punch to make a card for it.  This year I made a Halloween card using the Stampin Up Owl Punch, and the reason I did so is kind of sad.  :'(

It all started with this CUTE scarf….

Stampin Up Owl Punch

I bought this scarf early in October.  I was out shopping for some sunglasses and saw this on sale for $4.99.   You can’t tell from the picture, but it is made with really soft material along with being so stinkin’ cute!  I picked it up to send it to my daughter (who lives 6 hours away) for a little “surprise, I love you, thinking of you” kind of gift.  I intended to mail it that week so she could wear it throughout the month.  On Friday I found it still at my house and there was no reasonable way to get it to her for today.  Boo hoo!  In my despair I went to my studio and created a card inspired by the scarf.

Stampin Up Owl Punch Card

Stampin Up Owl Punch

I just love the Stampin Up Owl Punch!  This little “ghost” is adorable and he wasn’t hard to make.  Here’s how I made his costume…

First I cut a rectangle of white cardstock that was a tad wider than an owl punched.  It needs to be about 1 3/16″ wide.

Stampin Up Owl Punch

Next, I used the large oval punch to cut the rounded shape to go over his head.  You can tell from the picture how I inserted the paper in the punch from the bottom so that only one end of my rectangle was being rounded.  You could also do this with an oval framelit, but you would insert it in the framelit just like this punch, where only one end was being cut.

Stampin Up Owl Punch

Take your owl shape and place it over your punched piece so you can mark how long your costume needs to be.

Stampin Up Owl Punch

Then, insert this piece into the scallop oval punch the same way you did the oval punch.  You only want to cut the bottom edge of the costume.  Use your pencil mark to make sure your costume is the right length.

Stampin Up Owl Punch

This is how the costume should look on the owl shape before you embellish with the facial details.

Stampin Up Owl Punch

Honestly, the face was the most difficult part of this card because you’re working with smaller punched paper pieces, but if you had some googly eyes on hand you could completely eliminate this step and glue those babies on instead.

I just love this card and I love being able to use tools that I’ve had for a while in a fresh new way.  So… I am asking you to challenge me.  Come up with a holiday, or any card sending occasion, for me to create a card using the Stampin Up Owl Punch!  Please leave your suggestions in the comment section.   AND if you do that TODAY, I will give you the card that I make for the occasion you suggest…my Halloween treat for you!  Hope you all have a very blessed day!

Oct 13

Cable Knit Sweater Card

Cable Knit Sweater Card was not on my list of things to create today.  I had lots of items to work on in my studio, but this beautiful fall day was a bit of a distraction.  I played in the yard with the dogs for a while and returned an escaped (and unhappy) goat back to the pasture.  I did finally come back in the house and sat down in my studio to work.  Pinterest was my next distraction and I honestly cannot even tell you what I went there searching for, but I found some cute sweater cards made from the new Cable Knit Dynamic Textured Impressions Embossing Folder (that’s a mouthful) from Stampin’ Up and I had to make one.

Cable Knit Sweater Card

The beautiful weather called me outside again and so I photographed my sweater card next to the pumpkin and mum on my front porch and “voila”…a near perfect fall picture was created.  Don’t you love those beautiful fall colors?  The bright orange pumpkin makes me so happy!  But that sweater card, though.  Isn’t it the cutest?! Here’s how I made it…

The card base is 11 X 4 1/4”.  I used Very Vanilla cardstock.  Fold it in half to create your card.

Cable Knit Sweater Card

Next I used a 2″ circle framelit to cut a “neckline” from the folded edge of the card base.  You can always use a punch for this, but I didn’t have one large enough.

Cable Knit Sweater Card

It will look like this when you’re done.

Cable Knit Sweater Card

Next I took a piece of Delightful Dijon cardstock that measured 4 1/4 X 5 1/2″ and ran it through the Big Shot using the Cable Knit Dynamic Embossing Folder.  REMEMBER that with this Embossing Folder you will only use a cutting pad on the top, not the bottom.  It is too thick to use two cutting pads like you normally would.  In this picture you can also see that I used a ruler to mark spots on the sweater front.  First, I marked the center of the card at 2 1/8″ from either edge.  Next I made a mark 1 1/2″ just below this center mark.  I also made marks at the top edge 1″ from both sides.  To create the sweater neckline, use scissors or your paper trimmer to cut the “V” shape you created with these dots.  You will see what I mean in the next step.

Cable Knit Sweater Card

This is how the sweater front looks when placed over the card base.  We’ll take our paper snips and trim those two triangles along the top edge that stick out from the sweater.  (You’ll see it in the final picture.)

Cable Knit Sweater Card

Use any punch or framelit that you have to create a “pocket-shaped” piece of cardstock.  The framelit I used is from the retired Chalk Talk framelits.  You can see that I ran it through the embossing folder after it was die cut, and that I trimmed off the upper edge to make it look more like a pocket.

Cable Knit Sweater Card

Next, I grabbed my paper crimper and created the contrasting color trim for the sweater.  I also pulled out some self adhesive silver rimmed pearls to use for buttons.  You can check out the placement for the trim and the buttons on the final card.   Cable Knit Sweater I used Tombo Multipurpose Liquid Adhesive to attach the trim to the sweater and the sweater to the card.  The pocket was attached with Stampin’ Dimensionals. Here’s a last look at the finished project…

Cable Knit Sweater Card

Cable Knit Sweater Card

I chose fall colors for this card, but my next one will be a Christmas sweater!  It was so much fun to make.  I hope you’ll try your hand at creating a Cable Knit Sweater Card too.

 

Sep 23

Project Life Seasonal Snapshot 2015 {1}

The Project Life Seasonal Snapshot 2015 stamp set is not just for creating scrapbooks!  I have had a lot of fun playing with this set and creating cards using all of the different images.  I am going to be sharing these cards over the next few days, so check back tomorrow!  Today’s card features the bat image in this set.

Spooky! Project Life Seasonal Snapshot 2015

Project Life Seasonal Snapshot 2015

 

I decided that I wanted a group of bats, instead of the single image.  The masking technique was used to stamp the bat several times without overlapping them.   And since this is a photopolymer stamp set, it is easy to create these zig zag borders and make them straight the first time.  I hand lettered “spooky” across the card.  The set does include a Halloween sentiment, but sometimes I enjoy adding a unique touch of my own to the cards.

There are so many great stamp sets in the 2015 Stampin’ Up! holiday catalog, but if you are looking for a versatile set that can be used throughout the holiday seasons, then the Project Life Seasonal Snapshot 2015 stamp set is an obvious choice.  Tomorrow I will be sharing the Thanksgiving card I made from this set, so be sure to come back and check it out!